1967-1993 Chevrolet Pickup & Van NOS Left Hand Lower Control Arm Crossmember Bracket GM # 3907837

This new old stock left hand lower control arm crossmember bracket was manufactured by General Motors for use on the following models:

Chevrolet Pickup  1967-1969 Series 20 except 396, 4WD, D-D,

Chevrolet Pickup  1967-1969 Series 30,

Chevrolet Pickup  1967-1969 Series 10 except 4WD, 

Chevrolet Pickup  1970 Series 10 thru 30 (Conv., D-D),

Chevrolet Van 1970 G-10-20,

 Chevrolet Pickup 1973 CP-2, 3 except 11,000 lb. axle,

Chevrolet Pickup 1973 M.H.C. except 14,000 G.V.W.,

Chevrolet Van 1973 G-3

Chevrolet Pickup 1974 GCP-1, 2, 3, Blazer (C), Jimmy (C) except 11,000 lb. axle,

Chevrolet Pickup 1974-1976 M.H.C. with JB8 except Dana axle,

Chevrolet Pickup  1975-1978 CG-3,

Chevrolet Van  1975-1978 P-3 with JB7, JB8 except F66, 

Chevrolet Pickup  1977-1978 GP-1, 2, Blazer (C), Jimmy (C),

Chevrolet Van 1977 G-1 (1st design),

Chevrolet Van 1978 G-1,

Chevrolet Pickup 1979-1984 CG-3,

Chevrolet Pickup 1979-1984 CP-1, 2,

Chevrolet Van 1979-1981 P-1, 2,

Chevrolet Pickup  1979-1984 C-1, 2,

Chevrolet Van 1979-1984 P-3 with JB7, JB8 , JD7 except H.D. air suspension, 

Chevrolet Pickup 1982 CG-3,

Chevrolet Van 1984 G-2 with JB5,

Chevrolet Pickup 1985-1986 C-1, 2,

Chevrolet Pickup 1985-1986 C-3 except H.D. front suspension F42,

Chevrolet Pickup 1987-1988 R-1, 2,

Chevrolet Pickup 1987-1988 R-3  except H.D. front suspension F42,

Chevrolet Van 1985-1991 G-2 with hydraulic power disc/drum brake (JD5),

Chevrolet Van 1985-1991 G-3,

Chevrolet Van 1992-1993 G2 with JD5,

Chevrolet Van 1992-1993 G3,

Parts Catalog note: On G Van 10 and 20 Series  1st design for 1977 is 1-1/2″ diameter shaft. 2nd design is for soft ride supports with 2″ diameter shaft.

Replaced 3892413 on 07/69 &  3820721 on 8/74

NOTE: Images show the condition and what is included in the sale.

*This item may be re-packaged to protect it from shelf wear.